COMFORT LIVING WINDOWS
BEAT THE HEAT AND...
When temperatures soar, ordinary window glass just can't handle the heat. Tinted glass spoils the view. Comfort Living glass, however, has been specially formulated to reject the sun's heat without affecting the view. It lets more light in and keeps out the heat so your home stays cool and comfortable. Comfort Living Glass coating provides the ultimate in performance and clarity of all Low E products. It blocks 95% of the sun's damaging ultraviolet rays so it will help your furniture, carpets and curtains beautiful for years to come.
During the cold weather, the insulating effect of your windows has a direct impact on how your rooms feel. Typically, 80% of the exposed surface of a window is glass, and the room-side of the glass directly affects the air temperature in the room. The better insulated the window glass, the warmer your room will be.
90°
OUTSIDE
COMFORT LIVING GLASS REDUCES WINDOW HEAT GAIN BY 64% COMPARED TO ORDINARY GLASS
75°
INSIDE
...IS BOLD ON COLD...
Solar Heat Gain Coefficient - (SHGC) The amount of solar radiation that enters a building as heat. The lower the number, the better the window is at reducing heat loss.
U-Factor - this represents the heat flow rate through a window expressed in BTU/hr/ft/F using winter weather conditions of OF outside and 70 F inside.
The smaller the number, the better the window is at reducing heat.
UV and Fading Transmission - These regions includes all of the ultraviolet energy and most of the visible spectrum and will give the best representation of UV protection and relative fading rates. The lower the number, the better the window is for reducing fading potential of carpets and interior furnishings.
RESPONSIBLE ENVIRONMENTAL STEWARDSHIP IS
OUR GOAL
No matter where you live, Comfort Living Windows will help you achieve your goal saving resources and money with your heating and cooling. Our Comfort Living Glass system is a dual glazed insulated glass unit which consists of 3 layers of silver, a stainless steel spacer system and an air space filled with high density Argon gas.
WARM-EDGE TECHNOLOGY
Our stainless steel spacer dramatically reduces the risk of condensation on windows by conducting significantly less cold than aluminum, metal, and other thermoplastic spacer systems
Primary Polyisobutylene (PIB) Seal barrier, the first layer of our dual-seal system, prevents moisture from penetrating the insulated glass unit, and also retains argon or krypton gas in the airspace.
SECONDARY SILICONE SEAL
Secondary silicone barrier, the second layer of our dual seal system, creates a weatherable, structural bond that adheres the glass to the spacer, and retains its strength during expansion and contraction cycles.
DESSICANT MOISTURE ABSORBER
Primary Polyisobutylene Seal
By filling all four sides of the Stainless Steal Spacer frame with beads of desiccant, an additional layer of vapor protection is provided to further protect the
GLASS COMPOSITION
ENJOY THE COMFORT AND BEAUTY OF YOUR HOME...
ALL OVER AGAIN
-
Ideal balance of solar control and high visibility.
-
Year-round comfort and energy savings.
-
Suitable for all areas.
-
Spectrally selective - The ultimate in solar heat control, fading protection and visibility.
-
Warm wintertime inside surface temperatures with less condensation.
-
Outperforms tinted glass used in warmer climates without darkening your view. Allows you to enjoy your view in the summertime.
-
12-layer pat1ented protection.
-
Three ways to save... The perfect window no matter where you live.
-
Annual energy savings
-
A/C equipment savings
-
Tax benefits